Universal Intercooler Piping Inter Cooler Piping Focus Turbolader

  

Universal intercooler piping intercooler piping development Turbolader. This product page has been automatically translated. If you have questions, feel free to contact us. Universal intercooler piping intercooler pipe tuning turbo 2.5.

2.5 Universal intercooler piping. The turbocharger is at the heart of every turbocharged engine. The turbocharger turbine wheel is driven by the exhaust gases and compressed compressor side, here the effect of thermal expansion is used. Unfortunately, radiant heat from the engine or the turbocharger also heats the newly sucked air, which reduces the efficiency of the turbocharger. Typically, turbocharged vehicles are equipped with an intercooler, but these are often very small and often reach their limits during engine tuning.

To counter this, a charge air cooler with a larger network or a larger cooling surface can be installed. This cooler charge air pipe is a universally applicable set, which you can use to make individual pipes. It is therefore particularly suited to vehicles for which there is no specific kit to the vehicle or to dredge the sector vehicles or motorsports. Please note that some setting parts must be accepted by an expert (tüv).

It is best to discuss whether an entry is necessary with an expert of your confidence. Unless otherwise specified in the offer, the product described above shall be delivered without expert advice. Uncertified parts can by individual acceptance, but it is at the discretion of the examiner and should be discussed with the examiner in advance. It will be our pleausre to advise you. Sign up to the newsletter.

The seller is \This article can be shipped worldwide.

1. Mounting position: straight <\/ li>
2. Position montage3: down <\/ li>
3. montage1 position: left <\/ li>
4. manufacturer part number: 242 <\/ li>
5. Position montage2: before <\/ li>
6. Manufacturer: Final edition avantgarde step <\/ li>
7. brand - no brand / generic - <\/ li> <\/ Ul>