Reservoir type of fuel 90b (vortex). Cable braided steel 5 m. 4 fittings dash6 90 degrees.2x fittings dash6 180 degrees. 3.9 liters of volume.
Diameter of the hole of the mounting points: 165 mm. The reservoir has connections 2x bottom, when using 2x fuel pumps. If you want to use one fuel pump, you can simply close the connection.
At the top, the tank has 4 connections where you connect the input of the original fuel tank, the return of the fuel rail and the overflow (driving back to the original tank). Especially in racing, it may happen that due to high g-forces during cornering, the fuel so that the fleet fuel pump sucks air.This can be remedied by installing an intermediate tank (vortex). It is connected so as to be original tank filled of fuel and the fuel is pumped from the intermediate tank to the engine with an external fuel pump. The return of the engine is led to the intermediate tank, the overflow of the intermediate container in turn to the former return the original tank. Due to the smaller size of the tank it is filled by fuel continuously, which means that the pump can no longer suck air.
Please note that some setting parts must be accepted by an expert (tüv). It is best to discuss whether an entry is necessary with an expert of your confidence. Unless otherwise specified in the offer, the product described above shall be delivered without expert advice. Uncertified parts can by individual acceptance, but it is at the discretion of the examiner and should be discussed with the examiner in advance. It will be our pleausre to advise you.
16% VAT advice newsletter Contact Contact. The item \fuel \The seller is \This article can be shipped worldwide.